Posts Tagged "net"

NCS Expert: How To Modify NETTODAT Files

NCS Expert: How To Modify NETTODAT Files

in NCS Expert Software | 4 comments

Overview For some features, such as controlling how long you have to press the lock button down on the key fob to fold in the car’s mirrors, require you to modify the NETTODAT.TRC file.    Note To keep this tutorial as short as possible, I will not be going into some of the details for NCS Expert since most were explained in the Getting Started guide. So if you are new to coding BMW E90s, be sure to follow the Getting Started guide first by clicking the following button:  Getting Started Guide Let’s Get Started In NCS Expert, load the Expertmode profile Press F1, and then press F3.  For the ECU, choose the CAS ECU. Press F6, and then press F4 to choose which module you are wanting to change the NETTODAT file for and press the OK button. Press F4 to read the ECU. When you read the ECU, a new NETTODAT.TRC file (which you should backup someplace on your computer) will be created in the NCS Expert WORK folder. A pop-up window titled NETTODAT.TRC will also appear. Exit out of that window. Open the NETTODAT.TRC file located in the NCS Expert folder in  Notepad++ or Notepad.  Use the search feature in Notepad++ or Notepad to find the line you need to edit. When done making the changes, save the file as NETTODAT.MAN. Notice the .MAN extension at the end, instead of .TRC. Just so we do not screw up anything in the following steps, close out of NCS Expert and re-open it. This time load the FSW PSW MAN profile instead of the Expertmode profile.  Repeat steps 2-3. Press F5 or click the basic functions button and select “coapiCodeSgByNettoData” in the pop-up screen and then press the OK button. Another pop-up screen will appear, and for the field Nettodatenliste, type in NETTODAT.MAN. Next press the OK button on the pop-up window. After pressing the OK button in the pop-up window above, NCS Expert will take the values in the NETTODAT.MAN file located in your NCS Expert WORK folder, and code them to your car.  You can now close NCS Expert....

Read More
Activate Folding In Mirrors With Key Fob

Activate Folding In Mirrors With Key Fob

in Key Fob | 20 comments

Feature Overview: Activating this feature will allow you to hold the lock button on key fob for 2.5 seconds and the mirrors will automatically fold in. When the unlock button on the key fob is pressed, the mirrors will automatically fold back out. If you have Comfort Access installed, touching the driver or passenger door’s handle will allow the mirrors to fold in or out as well.  ECU/s Effected: NFRM Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 2011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. 1. Change The Following Parameters: NFRM Module Parameter Old Value New Value SPIEGEL_KOMFORT_EINKLAPP nicht_aktiv aktiv 2. Optional: Additional Feature: Feature Overview: Control how long you have to hold the key fob lock button before the mirrors start to fold in. By default, you have to hold the lock button down for 2.5 seconds.  ECU/s Effected: CAS   Note Before moving forward, if you do not know how to modify NETTODAT files in NCS Expert, click the following button to learn how: Modify NETTODAT Guide CAS NETTODAT File Available Time Options: Hex Value Time It Takes Mirrors To Start Closing 00 Instantly 05 0.5 seconds 0A 1.0 second (recommended) 0F 2.5 seconds (default) Find the following line in the NETTODAT file and edit the value in bold with one of the available time values in the table above: Line to look for:...

Read More