Posts Tagged "oem alarm"

NCS Expert: How To Modify VO (Vehicle Order)

NCS Expert: How To Modify VO (Vehicle Order)

in NCS Expert Software | 13 comments

Overview For some features, such as activating the OEM alarm on a vehicle that was not originally programmed at the factory to include an alarm, require you to add codes to the Vehicle Order (VO) also known as the FA. Below    Note To keep this tutorial as short as possible, I will not be going into some of the details for NCS Expert since most were explained in the Getting Started guide. So if you are new to coding BMW E90s, be sure to follow the Getting Started guide first by clicking the following button:  Getting Started Guide Let’s Get Started   In NCS Expert, load the Expertmode profile. Press F1 or the VIN/ZCS/FA button. Press F3 or the ZCS/FA f. ECU button. In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button. In the Choose ECU pop-up window, choose the CAS ECU and press the OK button. The model (CHASSIS), VIN number (FG), and VO (FA) should be displayed in NCS Expert. Press F2 or the Enter FA button to modify the VO. In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button. In the Enter VIN pop-up window, verify that the Vin listed is the correct VIN number for the vehicle. The last digit attached to the VIN number is a checksum. You should not have to change anything on this step. Just verify and press the OK button. In the Enter FA pop-up screen, for the Attribute text field, input the SA or Service Code. After typing in the code, press the Add button, and verify that the code was listed in the list of FA codes. After verifying, press the OK button. -SA codes will begin with a “$” -Service Codes will begin with a “+”   Press F6 or the Back button. Press F4 or Process ECU button. For the Choose ECU pop-up window, select CAS and press the OK button. Press F2 or the Change job button. From the Choose job pop-up window, select FA_WRITE and press the OK button. Under “get coded:”, verify that CAS is the ECU selected to get coded. Also verify the JOBNAME is equal to FA_WRITE, and...

Read More
Activate The E90 OEM Alarm System

Activate The E90 OEM Alarm System

in Alarm System | 4 comments

Feature Overview: Activating the OEM alarm will enable a chirp sound when locking/unlocking the doors from the key fob, and if you have the iDrive system installed, you will be able to easily activate and deactivate some of the alarm features. ECU/s Effected: CAS, CAPPL, DWAI, DWAS, CIC Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 20011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. Note: You must have the BMW OEM Alarm System Hardware installed for this feature to work correctly. To learn how to install the BMW OEM alarm system yourself, visit the following link: E90 Post OEM DIY Guide 1. Vehicle Options (VO) To Add: +K302 (Note: Adding this vehicle option would give you access to the DWAI and DWAS modules. If your vehicle already has the DWAI and DWAS modules, this step may not be necessary.) 2. Change The Following Parameters: DWAI Module Parameter Old Value New Value LAUTSTAERKE nicht_aktiv aktiv ALARM_OPT_FERNLICHT nicht_aktiv aktiv QUIT_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv PANIK_ALARM nicht_aktiv aktiv QUIT_AKUST_ENTSCH nicht_aktiv aktiv DEF_QUIT_AKUST_ENTSCH nicht_aktiv aktiv DEF_QUIT_OPT_ENTSCH nicht_aktiv aktiv DEF_QUIT_AKUST_SCHAERF_KL nicht_aktiv aktiv ANFRAGE_FENSTERPOSITIONEN nicht_aktiv aktiv PIAU_AKUST_ENTSCH nicht_aktiv aktiv PIAU_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv SIGNAL_HK nicht_aktiv aktiv DWAS Module (Note: change the below values only if the chirp is too quiet) Parameter Old Value New Value BUZZER_HIGH_LEVEL wert_06 wert_04   wert_07 wert_05     wert_08 CAS Module Parameter Old Value New Value SONDERTASTE_PANIKALARM nicht_aktiv panikalarm MOTORHAUBENKONTAKT nicht_aktiv aktiv CAPPL Module (Note: If your vehicle does not have the CAPPL module below, skip to the CIC module table) Parameter Old Value New Value ACOUSTIC fkt_gesperrt fkt_frei C941C_QUITT_AKUST_KLAPPE fkt_gesperrt fkt_frei K9416_QUITT_AKUST_ENTSCH fkt_gesperrt fkt_frei C9413_QUITT_AKUST_SCHAERF fkt_gesperrt fkt_frei CIC Module (Note: This next step is only necessary if your vehicle does not have the CAPPL module above) Parameter Old Value New Value ACOUSTICAL_LOCK_CONFIRM nicht_aktiv...

Read More