Posts Tagged "service code"

NCS Expert: How To Modify VO (Vehicle Order)

NCS Expert: How To Modify VO (Vehicle Order)

in NCS Expert Software | 13 comments

Overview For some features, such as activating the OEM alarm on a vehicle that was not originally programmed at the factory to include an alarm, require you to add codes to the Vehicle Order (VO) also known as the FA. Below    Note To keep this tutorial as short as possible, I will not be going into some of the details for NCS Expert since most were explained in the Getting Started guide. So if you are new to coding BMW E90s, be sure to follow the Getting Started guide first by clicking the following button:  Getting Started Guide Let’s Get Started   In NCS Expert, load the Expertmode profile. Press F1 or the VIN/ZCS/FA button. Press F3 or the ZCS/FA f. ECU button. In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button. In the Choose ECU pop-up window, choose the CAS ECU and press the OK button. The model (CHASSIS), VIN number (FG), and VO (FA) should be displayed in NCS Expert. Press F2 or the Enter FA button to modify the VO. In the Choose CHASSIS pop-up window, choose the E89 chassis and press the OK button. In the Enter VIN pop-up window, verify that the Vin listed is the correct VIN number for the vehicle. The last digit attached to the VIN number is a checksum. You should not have to change anything on this step. Just verify and press the OK button. In the Enter FA pop-up screen, for the Attribute text field, input the SA or Service Code. After typing in the code, press the Add button, and verify that the code was listed in the list of FA codes. After verifying, press the OK button. -SA codes will begin with a “$” -Service Codes will begin with a “+”   Press F6 or the Back button. Press F4 or Process ECU button. For the Choose ECU pop-up window, select CAS and press the OK button. Press F2 or the Change job button. From the Choose job pop-up window, select FA_WRITE and press the OK button. Under “get coded:”, verify that CAS is the ECU selected to get coded. Also verify the JOBNAME is equal to FA_WRITE, and...

Read More