Posts Tagged "unlock"

Activate Turn On Rear Fog Lights When Welcome Light Is Activated

Activate Turn On Rear Fog Lights When Welcome Light Is Activated

in Lights | 6 comments

Feature Overview: Activating this feature will allow you to control how the rear fog lights come on if the welcome light feature is activated and you unlock your car. You will have the choice of either instant or gradually turn on the rear license plate lights.  ECU/s Effected: FRM (NFRM) Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 20011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. 1. Change The Following Parameters: NFRM Module Parameter Options Description WL_NSL hart_einschalten rear fog lights come on instantly   soft_einschalten rear fog lights gradually come on   nicht_aktiv rear fog lights will not come on/feature...

Read More
Activate Turn On Rear Turn Signal Lights When Welcome Light Is Activated

Activate Turn On Rear Turn Signal Lights When Welcome Light Is Activated

in Lights | 1 comment

Feature Overview: Activating this feature will allow you to control how the rear turn signal lights come on if the welcome light feature is activated and you unlock your car. You will have the choice of either instant or gradually turn on the rear license plate lights.  ECU/s Effected: FRM (NFRM) Warning, most USA cars have rear fog lights installed, but not mechanically activated and a slightly cheap modification is needed to activate them. Click the following button to learn more: [button newwindow=”yes” link=”http://www.e90post.com/forums/showthread.php?t=51749″ color=”orange”] Click Here[/button]   Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 20011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. 1. Change The Following Parameters: NFRM Module Parameter Options Description WL_BLK_H hart_einschalten rear turn signal lights come on instantly   soft_einschalten rear turn signal lights gradually come on   nicht_aktiv rear turn signal lights will not come on/feature...

Read More
Activate Folding In Mirrors With Key Fob

Activate Folding In Mirrors With Key Fob

in Key Fob | 20 comments

Feature Overview: Activating this feature will allow you to hold the lock button on key fob for 2.5 seconds and the mirrors will automatically fold in. When the unlock button on the key fob is pressed, the mirrors will automatically fold back out. If you have Comfort Access installed, touching the driver or passenger door’s handle will allow the mirrors to fold in or out as well.  ECU/s Effected: NFRM Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 2011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. 1. Change The Following Parameters: NFRM Module Parameter Old Value New Value SPIEGEL_KOMFORT_EINKLAPP nicht_aktiv aktiv 2. Optional: Additional Feature: Feature Overview: Control how long you have to hold the key fob lock button before the mirrors start to fold in. By default, you have to hold the lock button down for 2.5 seconds.  ECU/s Effected: CAS   Note Before moving forward, if you do not know how to modify NETTODAT files in NCS Expert, click the following button to learn how: Modify NETTODAT Guide CAS NETTODAT File Available Time Options: Hex Value Time It Takes Mirrors To Start Closing 00 Instantly 05 0.5 seconds 0A 1.0 second (recommended) 0F 2.5 seconds (default) Find the following line in the NETTODAT file and edit the value in bold with one of the available time values in the table above: Line to look for:...

Read More
Activate Unlocking All Doors When Removing Key Fob

Activate Unlocking All Doors When Removing Key Fob

in Key Fob | 6 comments

Feature Overview: Activating this feature will allow you to automatically have all your car doors unlock when you turn your BMW vehicle off. If you have comfort access installed, and you do not put your key fob into the key slot, your car will still unlock all the doors when you press the push to start button to turn the car off. Otherwise, your all your doors will unlock when you remove the key fob from the key slot. ECU/s Effected: CAS Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 2011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. WARNING This feature will only unlock the driver door if key fob is set to unlock the driver door only within the iDrive settings. To unlock all doors, make sure to set the key fob to unlock all doors within the iDrive settings, and this will unlock all doors. This also works with Comfort Access when the engine is shut off, but you might need the KOMFORT_EJECT parameter activated. 1. Change The Following Parameters: CAS Module Parameter Old Value New Value ER_KEYOUT_AUTOVR nicht_aktiv aktiv...

Read More
Activate The E90 OEM Alarm System

Activate The E90 OEM Alarm System

in Alarm System | 4 comments

Feature Overview: Activating the OEM alarm will enable a chirp sound when locking/unlocking the doors from the key fob, and if you have the iDrive system installed, you will be able to easily activate and deactivate some of the alarm features. ECU/s Effected: CAS, CAPPL, DWAI, DWAS, CIC Feature Confirmed Working On The Following Car Model Years: 2006 E90 2007 E90 2008 E90 2009 E90 2010 E90 20011 E90 If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below. Note: You must have the BMW OEM Alarm System Hardware installed for this feature to work correctly. To learn how to install the BMW OEM alarm system yourself, visit the following link: E90 Post OEM DIY Guide 1. Vehicle Options (VO) To Add: +K302 (Note: Adding this vehicle option would give you access to the DWAI and DWAS modules. If your vehicle already has the DWAI and DWAS modules, this step may not be necessary.) 2. Change The Following Parameters: DWAI Module Parameter Old Value New Value LAUTSTAERKE nicht_aktiv aktiv ALARM_OPT_FERNLICHT nicht_aktiv aktiv QUIT_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv PANIK_ALARM nicht_aktiv aktiv QUIT_AKUST_ENTSCH nicht_aktiv aktiv DEF_QUIT_AKUST_ENTSCH nicht_aktiv aktiv DEF_QUIT_OPT_ENTSCH nicht_aktiv aktiv DEF_QUIT_AKUST_SCHAERF_KL nicht_aktiv aktiv ANFRAGE_FENSTERPOSITIONEN nicht_aktiv aktiv PIAU_AKUST_ENTSCH nicht_aktiv aktiv PIAU_AKUST_SCHAERF_KLAPPE nicht_aktiv aktiv SIGNAL_HK nicht_aktiv aktiv DWAS Module (Note: change the below values only if the chirp is too quiet) Parameter Old Value New Value BUZZER_HIGH_LEVEL wert_06 wert_04   wert_07 wert_05     wert_08 CAS Module Parameter Old Value New Value SONDERTASTE_PANIKALARM nicht_aktiv panikalarm MOTORHAUBENKONTAKT nicht_aktiv aktiv CAPPL Module (Note: If your vehicle does not have the CAPPL module below, skip to the CIC module table) Parameter Old Value New Value ACOUSTIC fkt_gesperrt fkt_frei C941C_QUITT_AKUST_KLAPPE fkt_gesperrt fkt_frei K9416_QUITT_AKUST_ENTSCH fkt_gesperrt fkt_frei C9413_QUITT_AKUST_SCHAERF fkt_gesperrt fkt_frei CIC Module (Note: This next step is only necessary if your vehicle does not have the CAPPL module above) Parameter Old Value New Value ACOUSTICAL_LOCK_CONFIRM nicht_aktiv...

Read More